Grim Posted September 9, 2013 Report Share Posted September 9, 2013 Yeah, scale is all over the place...not that I really care because it always has been a bit dodgy, but I was taking photos today and am going to have to come up with a creative base for Vanessa so she doesn't look freakish small next to her new sisters [ATTACH=CONFIG]15240[/ATTACH] This annoys the heck out of me. *ugh* ---------- Post added at 10:06 PM ---------- Previous post was at 09:43 PM ---------- So for those of us who don't like the scale difference of the Vik plastics we just purchased, can we return them? Quote Link to comment Share on other sites More sharing options...
rikowal Posted September 9, 2013 Report Share Posted September 9, 2013 In the new Justice box, the Death Marshal who is crouching down is way bigger than other two Death Marshals. It is almost as if they are using the illustration too much for the basis for the 3d model, as he was in the foreground in the picture, therefore he would be bigger than the other two. If they are digitally sculpting them, they should have made "armatures" (ex.Zsphere stick figure in Zbrush) that would be the base for each sculpt, so that all of the plastic minis would be relatively in scale with each other(obviously body types and height and such would change such things, but you could adjust the armature accordingly). Quote Link to comment Share on other sites More sharing options...
DangerousBeans Posted September 9, 2013 Report Share Posted September 9, 2013 Now that is peculiar, I assume they're on the same sprue. Well, maybe not as I'd imagine the coffins will take up a lot of room if Miss Pack is anything to go by. Pics? Quote Link to comment Share on other sites More sharing options...
i_was_like_you Posted September 9, 2013 Report Share Posted September 9, 2013 In the new Justice box, the Death Marshal who is crouching down is way bigger than other two Death Marshals. It is almost as if they are using the illustration too much for the basis for the 3d model, as he was in the foreground in the picture, therefore he would be bigger than the other two. If they are digitally sculpting them, they should have made "armatures" (ex.Zsphere stick figure in Zbrush) that would be the base for each sculpt, so that all of the plastic minis would be relatively in scale with each other(obviously body types and height and such would change such things, but you could adjust the armature accordingly). Good point. You may have just hit the nail on the head when it come to solving this mystery. Quote Link to comment Share on other sites More sharing options...
zFiend Posted September 9, 2013 Report Share Posted September 9, 2013 One does have to question what the point is of posting about how this isn't an issue for you. It doesn't contribute anything to getting the problem fixed for those of us for whom it is an issue. I think we should all expect better from Wyrd than this or Transmortis, even if those things don't affect or bother us personally. Quote Link to comment Share on other sites More sharing options...
theJudge Posted September 9, 2013 Report Share Posted September 9, 2013 I remember Mack himself commenting on how the crouching DM was broader in the shoulders way back when Wyrd first got the first run of the minis and how he liked that the DMs were not carbon copies of eachother size wise. It gave me the impression that size difference in the DMs was intentional. However Mack does not work in the production side of things so my assumption is most likely inaccurate. I'm pretty sure Mack mentioned this when he did an "Ask Me Anything" feature in my local Facebook group. It was really cool of him to do that. Quote Link to comment Share on other sites More sharing options...
Grim Posted September 9, 2013 Report Share Posted September 9, 2013 It's turning into a big issue for me and my miniature OCD. I just want to return it, otherwise, it will in my Bin of Forgotten Miniatures. Quote Link to comment Share on other sites More sharing options...
Dracomax Posted September 9, 2013 Report Share Posted September 9, 2013 If you don't want them, your best bet is probably going to be to sell them either as a crew or parted out--or trade for a crew you want. I wouldn't be surprised if you could make a profit if you wait a month--it's going to be a while before they are officially released, so demand should go up a bit before that happens. Quote Link to comment Share on other sites More sharing options...
Mako Posted September 9, 2013 Report Share Posted September 9, 2013 I like models to be different sizes because people are different sizes. And I think the Viks are the only ones actually described as tall in the fluff. That said, if people feel they're out of scale then they certainly have the right to say it (though the inverse applies - those that think they're fine also have the right to say it, because Wyrd deserve to know that both sides exist). I haven't noticed it myself, but then the three things on my desk are ice gamin, the ice golem, and pigtail ronin, so I wouldn't be able to tell! If they're really out, it might bother me. But unless it's a massive difference, it probably won't bother me any more than the disparity that some of the metals had (barely at all). Quote Link to comment Share on other sites More sharing options...
decker_cky Posted September 9, 2013 Report Share Posted September 9, 2013 I still think Willie has the most mismatched scale. Willie is about the same size as the union miners, who are at the large end of the scale from first edition models. I'd be interested in seeing how those models scale with the Viks. Quote Link to comment Share on other sites More sharing options...
rikowal Posted September 9, 2013 Report Share Posted September 9, 2013 Now that is peculiar, I assume they're on the same sprue. Well, maybe not as I'd imagine the coffins will take up a lot of room if Miss Pack is anything to go by. Pics? I'm at the office right now..but I'll post some later. Quote Link to comment Share on other sites More sharing options...
Belakor Posted September 9, 2013 Report Share Posted September 9, 2013 Ugh, this doesn´t make me too happy and waiting for my GenCon package get´s a bad tast. Quote Link to comment Share on other sites More sharing options...
Boshea Posted September 9, 2013 Report Share Posted September 9, 2013 Comparison of Seamus versus his two other sculpts and Lynch. Not a great comparison since the others are based, but he's about half-head to a head taller than the other sculpts. Same goes for belles and sybelle compared to their old sculpts. It looks like the new plastics are using a slightly larger scale, which I'm fine with since the book 4 plastics were proportioned smaller than the metals. It looks like the new plastic have the metal proportions, but use the book 4 plastics truer scale... if that makes any sense. As for my opinion of Willie's scale, I think his head just looks cartoony. Quote Link to comment Share on other sites More sharing options...
rikowal Posted September 10, 2013 Report Share Posted September 10, 2013 Sorry in advance for the lousy photo quality. Here are a comparision of the DM coffins: As you can see, the one in middle is for a giant, and the other two are for babies compared to his. I should have taken a picture of the giant's arms, but here are the torso and heads lined up. It doesn't bother me THAT much, just as a 3d modeler/sculptor/QC "professional" I thought that going to computer based sculpting would eliminate the scaling issues that hand sculpting would bring about. Like I said in a earlier post, if I had to design a line of plastic sculpts, I would have made a base armature file for perhaps "average male", "average female", "midget creature"...and used these as the basis for all the sculpts. Now, I did do some research on Wargames Factory production, and it appears they not only do pure digital sculpts, but they will scan physical sculpts and clean them up digitally...so maybe that is what happened in some of these cases and what has made the scale all over the place. With that being said, I still love this set. Wyrd has set the bar for dynamic miniatures for sure. I love the flow of movement in particular with the Death Marshals. Quote Link to comment Share on other sites More sharing options...
Grim Posted September 10, 2013 Report Share Posted September 10, 2013 That's a huge discrepancy in size for the Death Marshalls. Looks like I am going to have to pick the metal ones to go with my Tara crew. Quote Link to comment Share on other sites More sharing options...
hackdZ Posted September 10, 2013 Report Share Posted September 10, 2013 I can confirm for anyone interested: The Ronin (sold separately from the Vik's box) are the same scale as the ones in the crew box. Giant Amazon women ahoy! Quote Link to comment Share on other sites More sharing options...
decker_cky Posted September 10, 2013 Report Share Posted September 10, 2013 Playing with the giant viks and ronin, you can sentence your opponents to death by snoo-snoo! Quote Link to comment Share on other sites More sharing options...
i_was_like_you Posted September 11, 2013 Report Share Posted September 11, 2013 Playing with the giant viks and ronin, you can sentence your opponents to death by snoo-snoo! "Be gentle, it's my first time." Quote Link to comment Share on other sites More sharing options...
Nicodem Posted September 12, 2013 Report Share Posted September 12, 2013 Also have a look at the new death marshals compaired to Lady J. Quote Link to comment Share on other sites More sharing options...
daemonkin Posted September 12, 2013 Report Share Posted September 12, 2013 I think the problem is exaggerated by the fact that with plastic sculpts you can get finer details compared with traditional metal sculpting. I think the new Seamus box is excellent and the belles, if slightly larger, are proportioned better than the originals. D. Quote Link to comment Share on other sites More sharing options...
Guardian Posted September 12, 2013 Report Share Posted September 12, 2013 Yes, the "front" Death Marshal really does look ridiculously large! Quote Link to comment Share on other sites More sharing options...
daemonkin Posted September 12, 2013 Report Share Posted September 12, 2013 That's because he's a super death marshal. D. Quote Link to comment Share on other sites More sharing options...
zFiend Posted September 12, 2013 Report Share Posted September 12, 2013 Could someone post up the new belles next to the old belles? Quote Link to comment Share on other sites More sharing options...
Nicodem Posted September 12, 2013 Report Share Posted September 12, 2013 i like the new size, just wish tara was same size and that it was consistent Quote Link to comment Share on other sites More sharing options...
Manic Mouse Posted September 12, 2013 Report Share Posted September 12, 2013 i like the new size, just wish tara was same size and that it was consistent I don't think anyone is taking issue that the models are bigger - I personally would also prefer the larger "heroic" size - but as you say that the scale is inconsistent. Some are Ten Thunders plastic tiny, some Viktorias giants. Apparently even models in the same pack. Not much excuse for this with digital sculpting, it's just really REALLY sloppy product. We should all expect better from Wyrd, even if it doesn't personally bother us. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.