Wulfen Posted September 5, 2009 Report Share Posted September 5, 2009 Ok, posting a link to my templates/tokens; Guild is the only one done so far, but these really didn't take too long, so I hope to have the rest done soon. It's in doc format, but I can host PDF as well, I just didn't like how it was converting them. http://www.filefront.com/14467663/Malifaux%20Guild%20Tokens.docx Let me know what you guys think, they were pretty hastily done in spots, but they work for now. The tokens should print with no scaling and go right onto 30mm bases. I did the flame templates as standalone, so if you want to put them on bases, they'll need to be resized. Quote Link to comment Share on other sites More sharing options...
streetsamurai Posted September 5, 2009 Report Share Posted September 5, 2009 great stuff Quote Link to comment Share on other sites More sharing options...
Nathan Caroland Posted September 5, 2009 Report Share Posted September 5, 2009 Fun stuff. Quote Link to comment Share on other sites More sharing options...
DangerousBeans Posted September 5, 2009 Report Share Posted September 5, 2009 doesn't work Quote Link to comment Share on other sites More sharing options...
Wulfen Posted September 5, 2009 Author Report Share Posted September 5, 2009 doesn't work What do you mean it doesn't work? It's just a Word doc. If you don't have MS Office, you can try OpenOffice, or just hang tight until I can get a PDF uploaded, probably later tonight. Quote Link to comment Share on other sites More sharing options...
DangerousBeans Posted September 5, 2009 Report Share Posted September 5, 2009 Sorry, that came out wrong. When I tried to open an error came up, probably just my crappy computer. Quote Link to comment Share on other sites More sharing options...
capcap Posted September 5, 2009 Report Share Posted September 5, 2009 Thanks, I got it to work. I would suggest PDF as it is more universal compared to word. Look forward to seeing more of these in the future. I would like to request Neverborn, Arcanists and Outcasts. Quote Link to comment Share on other sites More sharing options...
Larkin Vain Posted September 5, 2009 Report Share Posted September 5, 2009 Well done. Thank you. Quote Link to comment Share on other sites More sharing options...
Wulfen Posted September 9, 2009 Author Report Share Posted September 9, 2009 Quick update, I have most of the stuff done, I wanted to go ahead and post what I had. I still need to get all of Arcanists, Outcasts, and some Neverborn done; and I haven't done counters for models unreleased (with the exception, I think, of Canines), but I wanted to post this in case anyone wanted to use what I had already available. http://www.filefront.com/14495451/Malifaux%20WIP%20Tokens.docx Lots of body and corpse tokens in there, and I'll try to finish the rest of it within a week or two, plus generic tokens for DF, CB, WP and other adjustments. I'm also still meaning to convert it to PDF for ease of use. Quote Link to comment Share on other sites More sharing options...
Draykin Posted September 10, 2009 Report Share Posted September 10, 2009 Im gonna have to wait for the PDF cause I dont have the software to read these. Quote Link to comment Share on other sites More sharing options...
WEiRD sKeTCH Posted September 10, 2009 Report Share Posted September 10, 2009 Wulfen, since you're using Office 2007, try saving the file as a .doc file rather than a .docx file. That'll let it be more universally able to be opened. Quote Link to comment Share on other sites More sharing options...
MEdwards Posted September 10, 2009 Report Share Posted September 10, 2009 Chris, I've converted this to a PDF and it can be downloaded here: http://www.geocities.com/sparknutz17/Malifaux_WIP_Tokens.pdf Quote Link to comment Share on other sites More sharing options...
Shinobi Posted September 10, 2009 Report Share Posted September 10, 2009 Very nice!! I did some counters for my own crews last night, but used WWG textures for the graphics. Mounted them on artboard, wasn't fun cutting out all them circles!! Quote Link to comment Share on other sites More sharing options...
jmp_mydog Posted September 11, 2009 Report Share Posted September 11, 2009 Probably won't help you now but a compas cutter is less than $5 at micheal's you'll love it. Quote Link to comment Share on other sites More sharing options...
Draykin Posted September 12, 2009 Report Share Posted September 12, 2009 (edited) I just got an "Ek success" 1" punch last weekend! They make great tokens. It just takes some doing to get the artwork. Edited September 12, 2009 by Draykin Quote Link to comment Share on other sites More sharing options...
capcap Posted September 13, 2009 Report Share Posted September 13, 2009 These tokens are great. Thanks for the good graphics. Can't wait to try these on the table. Quote Link to comment Share on other sites More sharing options...
Khail Posted September 18, 2009 Report Share Posted September 18, 2009 Been using these for my Resurrectionists - nice work! Only thing not on the sheet that I seem to always want a token for is Defensive Stance. Quote Link to comment Share on other sites More sharing options...
Wulfen Posted September 22, 2009 Author Report Share Posted September 22, 2009 Just got back from a work trip to Tampa, so I should hopefully have all of them done in the next few days, including generics like +/- to CB, DF, stuff like that. Thanks for taking a look! Quote Link to comment Share on other sites More sharing options...
TheBugKing Posted September 22, 2009 Report Share Posted September 22, 2009 Just got back from a work trip to Tampa, so I should hopefully have all of them done in the next few days, including generics like +/- to CB, DF, stuff like that. Thanks for taking a look! You have to mention stuff like this! There is a group in Tampa as well as a few folks in Orlando! (Would have been fun to play. Not that I had the time unfortunately. ) And on that note, I am in Wetherford Oklahoma till Thursday morning. Going to be busy as hell though. Keep up the work on the tokens. They look good! Quote Link to comment Share on other sites More sharing options...
Sushicaddy Posted September 22, 2009 Report Share Posted September 22, 2009 I plan to get some large glass beads (like glass tokens but wider, some are around 1" in diameter, but are flat) and glue these to the underside of them. Great work! Quote Link to comment Share on other sites More sharing options...
Wulfen Posted November 20, 2009 Author Report Share Posted November 20, 2009 Quick update here, sorry for the delay, between work and an untimely video card issue, I've been late getting these ready. I'm on the final stretch now, just some Neverborn and Outcasts left, and I'll post the full set. Quote Link to comment Share on other sites More sharing options...
n0signal Posted November 20, 2009 Report Share Posted November 20, 2009 Good stuff man, I'm looking forward to all of these, great work!! Quote Link to comment Share on other sites More sharing options...
karn987 Posted November 20, 2009 Report Share Posted November 20, 2009 I cant get the file from file front, says it's not there :disappoin Quote Link to comment Share on other sites More sharing options...
Peoples Champ Posted November 20, 2009 Report Share Posted November 20, 2009 I cant get the file from file front, says it's not there :disappoin Same problem any help gratefully recieved. Quote Link to comment Share on other sites More sharing options...
mriverakc Posted November 20, 2009 Report Share Posted November 20, 2009 all the sites tell me the same thing that the file is not available. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.