Anfalas Posted February 6, 2016 Report Share Posted February 6, 2016 I'm assuming this is the correct forum for this question, so here goes. Lately I've taken to constructing dioramas to display my crews at tournaments. I'm still new to this of course, so there are many things I don't yet know. For instance, how to present the display neatly and tidily on the outside. When building mine, I tend to use black foam-core. This means I end up with horrible strips of visible foam along the edges that shows up no matter what I do to cover it. So, I was wondering, for those who do, how do you achieve the lovely solid black on your diorama's outside walls? For reference, the blacked edges on this marvelous piece is what I'm talking about: Quote Link to comment Share on other sites More sharing options...
Bengt Posted February 7, 2016 Report Share Posted February 7, 2016 I don't know what they have used in that example but if you look into paint for houses and furniture there is stuff that is very thick and covering. Another thought is to cover the sides with latex before painting it, or just use coloured latex. Quote Link to comment Share on other sites More sharing options...
Anfalas Posted February 7, 2016 Author Report Share Posted February 7, 2016 Interesting. Thanks for the input, @Bengt! Quote Link to comment Share on other sites More sharing options...
snitchythedog Posted February 8, 2016 Report Share Posted February 8, 2016 If you look at this image: Spoiler It looks like he paneled the sides and painted them. You have a couple of options depending on skill level and resources. Easiest and cheapest is black duct tape. It does not look the greatest but it works. Next up is mat board. This is the colored board that is used as the edging of picture frames. Plastic card is another option that is readily available. That might be what the artist did for the above diorama becasue you can see an edge line for the panels on the right side of the river. For a really solid edge you can also look at laminate counter top. It is a pain to work with but it will give you a solid permanent edge that is very clean in its appearance. Solid wood edging is another option. Just a couple of suggestions. The big thing is to plan out what your edges are going to look like when you start the design process for your base. It is much easier to design it in rather than add it on later. Hope that helps. Snitchy sends. 1 Quote Link to comment Share on other sites More sharing options...
Anfalas Posted February 9, 2016 Author Report Share Posted February 9, 2016 Awesome, that really helps! Thanks a bunch, @snitchythedog Quote Link to comment Share on other sites More sharing options...
SpiralngCadavr Posted February 9, 2016 Report Share Posted February 9, 2016 Agree with bengt. sorry, snitchy, but duct tape (reflective, gummy, textured, tears poorly) seems like a terrible plan. The rest of those sound... possible... but smearing pudding on the side of your diorama seems like it would be about as effective as duct tape edging. 1 Quote Link to comment Share on other sites More sharing options...
Fetid Strumpet Posted February 9, 2016 Report Share Posted February 9, 2016 Gaffer's Tape. Quote Link to comment Share on other sites More sharing options...
SpiralngCadavr Posted February 11, 2016 Report Share Posted February 11, 2016 Gaffer's tape is about a million times better than duct tape at presenting something nice, and if I were to recommend any tape in something like this, that'd be one I did. ...However, the way tapes' adhesive works, I still wouldn't in almost any case recommend it on something you wanted to last. Quote Link to comment Share on other sites More sharing options...
lusciousmccabe Posted February 11, 2016 Report Share Posted February 11, 2016 You'll also have a problem with the seam between each piece of tape being visible and having to awkwardly cut it if your base is an irregular shape. I'd definitely recommend something like plasticard edging, putty in the corners, sprayed black. Or cut the diorama base from something solid you can spray the edges of. 1 Quote Link to comment Share on other sites More sharing options...
haychdee Posted February 11, 2016 Report Share Posted February 11, 2016 I use photo frames for mine. I just replace the backing/insert with foam core but it all sits flush under the frames edges. HD 4 Quote Link to comment Share on other sites More sharing options...
SpiralngCadavr Posted February 11, 2016 Report Share Posted February 11, 2016 That's a great basing idea. Quote Link to comment Share on other sites More sharing options...
snitchythedog Posted February 15, 2016 Report Share Posted February 15, 2016 On 09/02/2016 at 2:08 AM, SpiralngCadavr said: sorry, snitchy, but duct tape (reflective, gummy, textured, tears poorly) seems like a terrible plan. Just trying to give all options from low to high, both in terms of cost and skill level. Black duct tape would fall into the category for novice builders. Not my personal first option. Afalas, glad the suggestions helped. Snitchy sends. Quote Link to comment Share on other sites More sharing options...
Guslado Posted February 15, 2016 Report Share Posted February 15, 2016 If you use a lot of foamcore, you can make the edge more attractive by "rabbeting" the joint. As it is easier to show that explain, here's a link I found on how to do this technique: Foamcore techniques for miniatures. 1 Quote Link to comment Share on other sites More sharing options...
onebitpixel Posted February 27, 2016 Report Share Posted February 27, 2016 You might want to try Gatorboard or Gatorfoam Board which is a little tougher the traditional paper foamboard... it usually has wood or plastic layers sandwiched around foam; it paints smoothly and cleanly and can be cut on the 45 or cut like Gusiado mentioned with a rabbet joint to make clean sharp edges. 1 Quote Link to comment Share on other sites More sharing options...
Anfalas Posted March 16, 2016 Author Report Share Posted March 16, 2016 On 14/02/2016 at 4:07 PM, Guslado said: If you use a lot of foamcore, you can make the edge more attractive by "rabbeting" the joint. As it is easier to show that explain, here's a link I found on how to do this technique: Foamcore techniques for miniatures. Rabbeting is a fantastic technique that I, very fortunately, discovered while constructing my diorama. I feel terrible that I forgot to check this forum while doing so though. It almost makes it feel like a wasted resource. That said, I'll have plenty to think of for my next project! ? On 10/02/2016 at 7:18 AM, haychdee said: I use photo frames for mine. I just replace the backing/insert with foam core but it all sits flush under the frames edges. HD haychdee, that is a gorgeous display. Unfortunately, I usually build quite large dioramas, vertically speaking. I'll certainly keep that in mind if I do a flat or low-set one though? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.