tallghost Posted September 4, 2010 Report Share Posted September 4, 2010 What does everyone use for sculpting bases? O.K. so far I've done my Nicodem crew on the Wyrd graveyard bases (really great sculpts) and my Ortegas on some pretty nice plank textured bases from Mystic Hobby resins. Before this, all of my mini basing has been done by gluing sand to the base and painting it. I want to try to do more for my Lady J group (wasteland themed) and my Gremlins (byou themed, natch.) The whole point of this is really, what kind of paste/putty/whatever do you use when you're sculpting your base? Milliput? Green Stuff? something else? I noticed Vallijo textue paste mentioned in the Malifaux Chronicles, but never actually seen the stuff. Quote Link to comment Share on other sites More sharing options...
HoarcatsPride Posted September 4, 2010 Report Share Posted September 4, 2010 I usually fill my bases in with green stuff. Then i usually sculpt or use Gale force nine's flock, static grass, etc. Quote Link to comment Share on other sites More sharing options...
Chev Chelios Posted September 5, 2010 Report Share Posted September 5, 2010 I don't usually use a putty to do bases. I will use everything from bark to rock type tile.I will search hobby stores for anything that might appear useful. One of the best sources is model railroading shops. Companies like Woodland Scenics have a lot of stuff. I normally do not "sculpt"a base.I will apply bits to it to make one.Balsa wood or popsicle sticks for wood floors,stuff like that. My Perdita set are on decorative bark that is going to be made to look like the cliffs of the Grand Canyon. There are all kinds of things out there that you can use on bases. Quote Link to comment Share on other sites More sharing options...
the imp Posted September 5, 2010 Report Share Posted September 5, 2010 I really enjoy making scenic bases. I use a plaster-like product called Durham's Rock Hard Water Putty. For ice or stone slabs I'll cast a slab of the stuff and break off pieces or carve it down to the shape I want. For my gremlin bases I've poured the putty on to the bases while it was a pudding-like consistency, then smoothed it with a wet fingertip. That gives me a nice, muddy, texture. This is a new technique for me and so far it's working well. I'm also experimenting to find a cheap and easy way to add long grasses and cattails. My first effort in that direction was to bore small holes into the putty and glue bristles from an old toothbrush into the holes. It looks good so far, but I want to work out a couple more leaf options. I also want to work out a suitably scummy looking and cheap effect for swamp water. Quote Link to comment Share on other sites More sharing options...
stephengroy Posted September 5, 2010 Report Share Posted September 5, 2010 (edited) I've been using cork, balsa, plasticard, cast bases, Squadron Green putty, Skullcrafts Steampunk basing kit, and most recently, two sizes of Woodsies craft circles from Michael's. One's almost 30MM insert size, the other almost 40. I center the smaller one, and it looks fine. The larger ones need a few trips around the Dremel, or heavy sanding to take off about 1MM.I have Sculpey and greenstuff, but no time to use them properly. I used Guardsman wood stain touch up markers (About $5 for light, medium and dark in a 3-pack at WalMart), then Vallejo gloss, or just use a matte spray coat. Edited September 26, 2010 by stephengroy Quote Link to comment Share on other sites More sharing options...
TimeLapse Posted September 5, 2010 Report Share Posted September 5, 2010 (edited) I take a more basic approach to my basing, I use Lightweight Spackling (Cheep and you can get it at a hardware store, the brand name on the one I’m using in these photos is Patch -n- paint). I use a knife on the bases and get a good desert sand feel, I get a tad bit of sand to accent it but really the sand is going to look like large rocks at this scale. I do all this before i prime so i can paint it latter. I used the cork board as well for larger rocks, here are some picks of my perdita stands. The green catus is green stuff and the skulls i got form a friend who plays undead Warhammer sruff, same with the arrow. And just for fun here is one of my minis with a lego gear, Edited September 5, 2010 by TimeLapse Quote Link to comment Share on other sites More sharing options...
Svenn Posted September 5, 2010 Report Share Posted September 5, 2010 TimeLapse, your bases look excellent! I love the half-buried skulls. As for basing my stuff... I tend to just do some type of flock (depending on the model... I did grass for my belles) and then at least 1 bit of extra detail that can be pretty much anything (again based on the model, gravestones made out of foamcore for my belles). Quote Link to comment Share on other sites More sharing options...
n0valoco Posted September 5, 2010 Report Share Posted September 5, 2010 My Sonia crew is currently on cork tiles and cut wine bottle corks. Once they're done (the bases) I'll post pics. I picked up some basing materials from Skullworks.com a while back. His leaf scatter is awesome! Quote Link to comment Share on other sites More sharing options...
AntiZombie Posted September 5, 2010 Report Share Posted September 5, 2010 I've been using greenstuff, plasticard and varouse bits to sculpt my bases ( and painted flock when I'm lazy) check out my user gallery for various examples Quote Link to comment Share on other sites More sharing options...
SweatyDemon Posted September 5, 2010 Report Share Posted September 5, 2010 For my Gremlins, I've been using wooden coffee stirsticks (flat) and skewers (for shish kabobs) for boardwalks/fence posts/signs. Use a wire brush on them to get the wood texture to stand out. Green stuff to make stuff stand up. I have also been using some Acrylic Gel Medium to make water effects. It's supposed to be used mixed with acrylic paint to give it more texture, but it dries clear. I'm using Soft Gloss; soft means it dries flatter (i.e. doesn't hold a shape well) and the gloss gives it the water effect. Quote Link to comment Share on other sites More sharing options...
odinsgrandson Posted September 7, 2010 Report Share Posted September 7, 2010 I'll chime in here on the Green Stuff side of things, although I actually use Gray Stuff more often. Overall, there isn't much difference when you're making a base. Another base that I'm fond of is cork board bases (just tear off a section that is around the right size and you'll have a nice slab of rock for your mini to stand on). Also, I tend to use a mix of train store gravel and cornmeal for the actual flocking. Quote Link to comment Share on other sites More sharing options...
Mentor Posted September 7, 2010 Report Share Posted September 7, 2010 I use pumice gel to make the texture for my bases. http://www.goldenpaints.com/products/medsadds/gels/gels.php It is easy to work with and you can mix paints in with it if you are into that sort of thing.... weirdo. Quote Link to comment Share on other sites More sharing options...
rvrchamp Posted September 7, 2010 Report Share Posted September 7, 2010 I use procreate terrain putty. It's a two part resin putty that dries rock hard. The great part is that it's really soft for a while which allows for all sorts of modeling fun. Step 1) mix the putty Step 2) apply putty to base Step 3) push any base bits and model into the putty Step 4) give atleast 24 hours to dry and you're done! http://www.thewarstore.com/product42203.html Quote Link to comment Share on other sites More sharing options...
tallghost Posted September 7, 2010 Author Report Share Posted September 7, 2010 A lot of great ideas and suggestions so far, thanks! For my gremlins, I'm defintly looking for something that I can sculpt with and add to, because I'm thinking of really soggy ground that would have little "potholes" of water in it and planks and logs thrown down to help travel. Edit: and those Ortega pics are awesome! I love the idea of using lego gears as scrap markers. Quote Link to comment Share on other sites More sharing options...
druchii Posted September 8, 2010 Report Share Posted September 8, 2010 What does everyone use for sculpting bases? O.K. so far I've done my Nicodem crew on the Wyrd graveyard bases (really great sculpts) and my Ortegas on some pretty nice plank textured bases from Mystic Hobby resins. Before this, all of my mini basing has been done by gluing sand to the base and painting it. I want to try to do more for my Lady J group (wasteland themed) and my Gremlins (byou themed, natch.) The whole point of this is really, what kind of paste/putty/whatever do you use when you're sculpting your base? Milliput? Green Stuff? something else? I noticed Vallijo textue paste mentioned in the Malifaux Chronicles, but never actually seen the stuff. I'll chime in here on the Green Stuff side of things, although I actually use Gray Stuff more often. Overall, there isn't much difference when you're making a base. Another base that I'm fond of is cork board bases (just tear off a section that is around the right size and you'll have a nice slab of rock for your mini to stand on). Also, I tend to use a mix of train store gravel and cornmeal for the actual flocking. I actually make ALL my own bases for Malifaux ( I also based 8k of Games Workshop demons...). Depending on the texture I want, I usually start with corkboard (the 1" or .8" thick is my favorite) and go from there. For ruined, rocky bases slap the corkboard on, and the add whatever sort of rubble you want to the top. Paint similar colors and you're golden. My Neverborn crew got Green Stuff bases, modeled into hilly terrain, with flock and tufts over top of that, while my Rasputina crew got corkboard, with Green Stuff "snow" over top, and some crystals made from plastic sprue. My demons are just straight attached to the top of corkboard, with snazzy paint jobs. Straight Green Stuff: With stuff on top of it: My snow bases: And just plain cork: It took me about 3.5 hours to make over 150 bases using just the plain corkboard, and I love the texture it gives, and it's very easy to work with. d Quote Link to comment Share on other sites More sharing options...
tallghost Posted September 8, 2010 Author Report Share Posted September 8, 2010 Durchii, I really like the idea of the ice crystals on your 'tina crew. I'm thinking of similarlooke when I get aroun to mine, but I found some clear acryllic rods to use. Quote Link to comment Share on other sites More sharing options...
AvatarForm Posted September 11, 2010 Report Share Posted September 11, 2010 Personally, for a game like Malifaux where minis have a set height and none of the TLOS rubbish like WFB and 40k, you can go all out and build up your bases with cork tile or slate/pine bark for nice display-like bases. I will be doing a diary on WAU soon as my minis arrive for my Pandora crew. Using slate primarily for a shattered earth effect. Quote Link to comment Share on other sites More sharing options...
loganproudbeard Posted February 12, 2011 Report Share Posted February 12, 2011 Amazing!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.