Smeagle Posted January 8, 2019 Report Share Posted January 8, 2019 Just curios when the issues with the TINY Abyssinia "Titan" might get addressed and sorted out. The model is tiny, overpriced and looks ridiculous. 2 Quote Link to comment Share on other sites More sharing options...
gribble Posted January 8, 2019 Report Share Posted January 8, 2019 While I can't say I'm thrilled about the scale issues in general (Lord of Steel is also apparently a midget, and several of the minis just don't look right next to each other), I think "tiny, overpriced and ridiculous" is going a bit far. Either way, I wouldn't expect Wyrd to do anything about it. At this stage, with it in retail, they'd need to do a mass recall, re-print and replacement... which is probably beyond them for what is not really that big a deal (pun intended). 2 Quote Link to comment Share on other sites More sharing options...
Impact UK Posted January 14, 2019 Report Share Posted January 14, 2019 I have found the quality control lacking, with a number of models not just assembled poorly but assembled incorrectly. 4 Quote Link to comment Share on other sites More sharing options...
retnab Posted January 14, 2019 Report Share Posted January 14, 2019 33 minutes ago, Impact UK said: I have found the quality control lacking, with a number of models not just assembled poorly but assembled incorrectly. Weird, I haven't heard of that before. Got any examples? Quote Link to comment Share on other sites More sharing options...
Impact UK Posted January 15, 2019 Report Share Posted January 15, 2019 18 hours ago, retnab said: Weird, I haven't heard of that before. Got any examples? Yes I do, I had a couple of problems with the Royal Rifle Corps with legs on the knelt down models, legs not glued in the correct position and a couple of arms not quite right. I fixed these little issues and just moved on. The big problem is the South Wales Boarders box that came with 3 models incorrectly built. One model had the weapons on the arms on the wrong side and the piston on the underside of the arm was not in the correct place. The next one had pistons on the arms just sticking out and looking very stupid, then the last one had pistons sticking out in the wrong places and the pistons not even attached to anything at the back. Also had a head on one of the models devoid of detail (looks like glue melted most of the face off), Link to the photos South Wales Boarders. Now after many hours I have fixed the problems to make the models presentable but this is beside the point, if I am paying to have per-assembled models then they should be assembled correctly. 5 Quote Link to comment Share on other sites More sharing options...
gribble Posted January 15, 2019 Report Share Posted January 15, 2019 I've had similar issues with models that have arms glued in incorrect positions, resulting in guns being twisted and not being able to correct the twist without disassembling and reassembling (which I refuse to do for preassembled minis, so will be raising a support ticket). Also a few parts fell off in shipping (while disappointing this isn't unreasonable and I'm happy to fix these myself), and some parts are missing (one of my skulkers is entirely missing his arms). This has me worried and I have to find time to go back through everything and double check before I raise my support ticket. 3 1 Quote Link to comment Share on other sites More sharing options...
Impact UK Posted January 15, 2019 Report Share Posted January 15, 2019 27 minutes ago, gribble said: I've had similar issues with models that have arms glued in incorrect positions, resulting in guns being twisted and not being able to correct the twist without disassembling and reassembling (which I refuse to do for preassembled minis, so will be raising a support ticket). Also a few parts fell off in shipping (while disappointing this isn't unreasonable and I'm happy to fix these myself), and some parts are missing (one of my skulkers is entirely missing his arms). This has me worried and I have to find time to go back through everything and double check before I raise my support ticket. I have only had a small piston missing on one model but our Gibbering Hordes player has had 2 boxes with missing components. 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.