sandchigger Posted August 24, 2014 Report Share Posted August 24, 2014 So I picked up the nightmare edition Whiskey Golem at GenCon this year. Is there an instruction sheet for this guy because that is a LOT of little plastic bits on that sprue... Quote Link to comment Share on other sites More sharing options...
rb_man Posted August 24, 2014 Report Share Posted August 24, 2014 Here you go. http://wyrd-games.net/community/files/file/96-wyr21015-nightmare-whiskey-golem/ Quote Link to comment Share on other sites More sharing options...
sandchigger Posted August 24, 2014 Author Report Share Posted August 24, 2014 Awesome, thanks! Quote Link to comment Share on other sites More sharing options...
rb_man Posted August 24, 2014 Report Share Posted August 24, 2014 NP Quote Link to comment Share on other sites More sharing options...
Mason Posted August 25, 2014 Report Share Posted August 25, 2014 Despite being somewhat intimidating, the golem's parts are slotted in such a way that it's really difficult to get them put together incorrectly. My Whiskey Golem ended up going together really easily, though I had to leave the swing off (the rope was broken on the sprue). Quote Link to comment Share on other sites More sharing options...
The Godlyness Posted August 25, 2014 Report Share Posted August 25, 2014 Same but I improvised. Now he has a chain swing instead of rope. Quote Link to comment Share on other sites More sharing options...
CheshireMonkey Posted August 30, 2014 Report Share Posted August 30, 2014 I wish Wyrd would call out pieces that must be put on before assembling something. I missed the bottom leak until I had the thing 80% assembled. Quote Link to comment Share on other sites More sharing options...
Boshea Posted August 30, 2014 Report Share Posted August 30, 2014 I wish Wyrd would call out pieces that must be put on before assembling something. I missed the bottom leak until I had the thing 80% assembled. I did the same. Bottom was fairly loose on mine when I noticed and was able to spread it open enough to slide it into place. Just snip the block off the end and you can probably fit it into the hole easily. Quote Link to comment Share on other sites More sharing options...
zFiend Posted August 30, 2014 Report Share Posted August 30, 2014 Bottom was fairly loose on mine when I noticed and was able to spread it open enough to slide it into place. Just snip the block off the end and you can probably fit it into the hole easily. Giggidy. Quote Link to comment Share on other sites More sharing options...
CheshireMonkey Posted August 30, 2014 Report Share Posted August 30, 2014 Yes, I can fix it, that's not my point. As Wyrd gets more elaborate with their models it's going to be easier and easier to miss something. A simple little "Put this here first" would be nice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.