BusterJ Posted December 1, 2011 Report Share Posted December 1, 2011 Pretty straight forward question, how would one go about getting that greyish looking skin for Molly? If it helps I use gw and pp paints. Quote Link to comment Share on other sites More sharing options...
Fetid Strumpet Posted December 1, 2011 Report Share Posted December 1, 2011 You can look at my entry into the 2011 Rotten Harvest entry for my example. If you like the look of it I can tell you how I achieved it, but it was a lengthy process. Quote Link to comment Share on other sites More sharing options...
Mirarii Posted December 1, 2011 Report Share Posted December 1, 2011 Dheneb Stone. Simply my favorite skintone. I use it as a base for flesh for my Dark Eldar, am using it for my Nephilim, and plan on using it for a long time to come. I usually just do one or two coats of watered down DS, followed by a wash (usually purple, but other colors can be used for different skin tones, I suggest watered down Badab black for grey). After the wash there is another coat or two of Dheneb to all the raised areas and a teensy bit to the recesses if you want to blend them a bit more. If you want lighter skin or are planning on striking highlights I would add some white to the Dheneb for another step. Here is a link to some pics of my brood to show how it worked for me. Quote Link to comment Share on other sites More sharing options...
Ozz Posted December 1, 2011 Report Share Posted December 1, 2011 Thank you for this thread, have been wondering how to paint my dead justice, just need to test out what washes look best now:D probably go for the tip on using black for the greyish flesh:D Quote Link to comment Share on other sites More sharing options...
dsmiles Posted December 2, 2011 Report Share Posted December 2, 2011 Well, the skin tone on the card is much better than mine, but... I used P3 Frostbite, highlighted up to white, then washed with a wash of Fortress Grey. You can see her here. EDIT: I used the same flesh tone on the Crooligans. Quote Link to comment Share on other sites More sharing options...
Fetid Strumpet Posted December 2, 2011 Report Share Posted December 2, 2011 For my recipe I painted the skin a base of PP Frostbite, then gave it a wash of GW Sepia Wash, then once dry a very thin wash of GW Green Wash, then gave the recesses of her face another shading of GW sepia wash, then highlighted up with GW Rotting Flesh, then gave a final highlight of GW bleached Bone. Quote Link to comment Share on other sites More sharing options...
BusterJ Posted December 2, 2011 Author Report Share Posted December 2, 2011 Thanks for all the tips guys, mega helpful :-) Quote Link to comment Share on other sites More sharing options...
TheOneWhoFell Posted December 2, 2011 Report Share Posted December 2, 2011 for GW paints, on the undead, I start with a base of Rotten Flesh (green) and use elf flesh for highlights/lowlights, depending on the look I'm going for.... sometimes I mix it up and START with the Elf Flesh and highlight/lowlight with the green... again, depending on the look... Quote Link to comment Share on other sites More sharing options...
dsmiles Posted December 2, 2011 Report Share Posted December 2, 2011 sometimes I mix it up and START with the Elf Flesh and highlight/lowlight with the green... Just did this on my Stolen and Hamelin. Then washed it with Ogryn Flesh. They don't look undead, but they don't look very healthy either (which was kind of the intent). Quote Link to comment Share on other sites More sharing options...
Omenbringer Posted December 3, 2011 Report Share Posted December 3, 2011 Just did this on my Stolen and Hamelin. Then washed it with Ogryn Flesh. They don't look undead, but they don't look very healthy either (which was kind of the intent). Great job on Hamelin though with a green or blue wash (vice the brownish Ogryn Flesh) they would look more undead for sure. Quote Link to comment Share on other sites More sharing options...
dsmiles Posted December 3, 2011 Report Share Posted December 3, 2011 I thought the Rotten Flesh would make him look jaundiced, instead it just made him look pale. Quote Link to comment Share on other sites More sharing options...
dragons_lair04 Posted December 5, 2011 Report Share Posted December 5, 2011 Using GW paints I do a base of rotting flesh, then a flesh wash, and finially a very light drybrush of elf flesh. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.