themurphyfella Posted April 29, 2013 Report Share Posted April 29, 2013 https://plus.google.com/110591212625344350349/posts/QKkXWT2eH9Q So I've started putting the new puppets together. I love them but some of the new sculpts are frankly insane with the fiddly level imvolved in assembly. yes we are looking at you mr death marshal. i figured i'd put up a few side by side shots of my progress to help motivate me along the paint trail. Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted April 29, 2013 Author Report Share Posted April 29, 2013 (edited) Edited April 29, 2013 by themurphyfella Quote Link to comment Share on other sites More sharing options...
ThePandaDirector Posted April 30, 2013 Report Share Posted April 30, 2013 I know what you mean =] It's good that they have parts that slot together (some can hold together without glue, but all models will need gluing to stay together properly), and have proper instructions and labelling, but some bits seem unecessary. Like Rusty Alyce's seperate pieces of hair, Death Marshal's badge or Convict Gunslinger's hair (can be tricky to know which way it goes). It's not just a case of having more parts to glue, but having more gaps to fill in. So far there doesn't seem too many issues in that area, but I imagine most cases where it does pop up could easily have been avoided. That said, the models are amazing. Compare Lady Justice, Bete Noire or Death Marshal to their originals and there's no contest imo (no more big ugly lips on the female puppets). Some of the old metals do hold up (Convict Gunslinger), but in most cases the plastics are a huge improvement. I can only imagine how models like Ice Golem, Mature Nephilim and Moleman are going to end up looking. Still, not sure if I'll use my metals to practice painting or use one of the less common puppets (the benefit of triples). Keep posting, can't wait to see what you do with them =] Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted May 1, 2013 Author Report Share Posted May 1, 2013 Lol I'm thinking that I'll have options to have same master battles. The big one will be mine of course Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted May 6, 2013 Author Report Share Posted May 6, 2013 (edited) So did a bit of work tonight. Figured I'd finish two ronin I had in progress to get back in practice. Then of course it was time to load up the paint stick for some priming. I know I've a lot to do when the stick was full and I still had models on the table. Edited May 6, 2013 by themurphyfella Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted May 6, 2013 Author Report Share Posted May 6, 2013 And the bank holiday push got all the priming done and another 5 puppets fully painted. Only got pictures of 3 before battery died so hog whisper and bayou gremlin tomorrow. Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted May 7, 2013 Author Report Share Posted May 7, 2013 So as promised the gremlin bros So the plan for what to do next came from the standard crew outline in the rules. I figured it'd be nice to have the intro list(s) be fully painted. The question now is do I practice the paint jobs on the metals or do alt, reversed paint schemes on the spares for master mirror matches Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted May 11, 2013 Author Report Share Posted May 11, 2013 So the painting continues. Bete and misaki got painted tonight. The Bete paint scheme I saw in a thread on the boards here but I can't got the life of me remember who painted it. I ended up with 2 Bete's because I like the original sculpt a lot. Misaki on the other hand is one of the figures that really benefited from the plastic conversion. I'll probably paint the metal one at some point but it didn't feel worth the effort tonight Quote Link to comment Share on other sites More sharing options...
i_was_like_you Posted May 11, 2013 Report Share Posted May 11, 2013 Good job! Keep 'em goin'. At some point I need to tackle at least my metal puppets. We'll see if I get the plastic ones any time soon. Last time I'd held off on getting them, but received them as a christmas present. Quote Link to comment Share on other sites More sharing options...
ThePandaDirector Posted May 11, 2013 Report Share Posted May 11, 2013 Thanks for sharing, but how you can like metal Bete Botox I don't know =P Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted May 12, 2013 Author Report Share Posted May 12, 2013 Thanks for sharing, but how you can like metal Bete Botox I don't know =P You shouldn't talk about my Angelina like that Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted May 20, 2013 Author Report Share Posted May 20, 2013 So I got a new figure done. So the metal Seamus gets a traditional green suit I found a solution to my problem on what to base them with. [ATTACH=CONFIG]13581[/ATTACH] Quote Link to comment Share on other sites More sharing options...
i_was_like_you Posted May 21, 2013 Report Share Posted May 21, 2013 So I got a new figure done. So the metal Seamus gets a traditional green suit [ATTACH=CONFIG]13582[/ATTACH] I found a solution to my problem on what to base them with. [ATTACH=CONFIG]13583[/ATTACH] [ATTACH=CONFIG]13581[/ATTACH] Mom, can I have your mismatched button collection? Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted May 26, 2013 Author Report Share Posted May 26, 2013 Nice one"I woz" actually picked the lot up in a hobby shop. Got some work done on the weekend. Metal lady J, got a traditional paint scheme. Some touch up still to do. Metal Misaki, got her hair and everything except the sword finished. Still debating done freehand on the robes. Then two death marshals nearly done. Some accent color to be added to then to be able to tell then apart Quote Link to comment Share on other sites More sharing options...
tthp2009 Posted May 29, 2013 Report Share Posted May 29, 2013 I actually painted all of but two of the bases as buttons so that the puppets can be added to their buttons when they're painted. I only have eight finished, but when a whole set is complete I'll post them ---------- Post added at 08:15 PM ---------- Previous post was at 08:14 PM ---------- So I got a new figure done. So the metal Seamus gets a traditional green suit [ATTACH=CONFIG]13582[/ATTACH] I found a solution to my problem on what to base them with. [ATTACH=CONFIG]13583[/ATTACH] [ATTACH=CONFIG]13581[/ATTACH] He looks amazing! Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted June 2, 2013 Author Report Share Posted June 2, 2013 More painting. I'm traveling thus week and discovering that from apps sharing pictures to a website is a little more involved. Anyway Side by side Misaki Misaki button base The death Marshall twins. Different bases will set them apart Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted June 19, 2013 Author Report Share Posted June 19, 2013 Quote Link to comment Share on other sites More sharing options...
oiche Posted June 20, 2013 Report Share Posted June 20, 2013 Your puppet looks great! And the button bases... love it :1_Happy_Puppet2: Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted June 23, 2013 Author Report Share Posted June 23, 2013 (edited) Thanks oiche. Got more buttons done Wip on the green resser buttons Edited June 23, 2013 by themurphyfella Quote Link to comment Share on other sites More sharing options...
sssk Posted June 23, 2013 Report Share Posted June 23, 2013 (edited) I've been considering how to base my Puppets. Might have to steal the button idea, they look fantastic. Considering the size of the hexagons on the unstitched board, I might get some of the coloured 30mm malifaux bases so that I can blu-tac the puppets (on their button bases) into them, and then (for example) Lady J's puppets can all have red bases, even if she hires a belle or silurid. Then because they're just blu-tacked in, they could easily be swapped for different masters. Really well done. A very inspiring thread Edited June 23, 2013 by sssk Quote Link to comment Share on other sites More sharing options...
i_was_like_you Posted June 24, 2013 Report Share Posted June 24, 2013 I like the deep-dish button you found for your Silurid. I have a couple similar caps from some odd juice drink that are just like it, but on regular Malifaux scale, probably fitting best on a 40mm.. Still haven't found a model I'd want to put on it yet, but I've been considering an Arachnid Swarm, possibly the Alts that come with Ramos' Avatar. Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted June 25, 2013 Author Report Share Posted June 25, 2013 (edited) so tonight i got to paint some buttons for the ressers baby Kade swapped buttons at the sight of a baby gap button. He's a slave to labels And the outcasts await their buttons next Edited June 25, 2013 by themurphyfella Quote Link to comment Share on other sites More sharing options...
themurphyfella Posted June 25, 2013 Author Report Share Posted June 25, 2013 I've been considering how to base my Puppets. Might have to steal the button idea, they look fantastic. Considering the size of the hexagons on the unstitched board, I might get some of the coloured 30mm malifaux bases so that I can blu-tac the puppets (on their button bases) into them, and then (for example) Lady J's puppets can all have red bases, even if she hires a belle or silurid. Then because they're just blu-tacked in, they could easily be swapped for different masters. Really well done. A very inspiring thread Thanks. Steal away, I'm pretty sure there are any number of button bases going to be used for puppets. The reason I put the bases on the buttons is so I can suit them into the colored bases in the future if I need to keep miniatures separate. The pw bases sit nicely into the Colored bases Quote Link to comment Share on other sites More sharing options...
nagash13 Posted July 15, 2013 Report Share Posted July 15, 2013 I love the buttons idea. a beginner modeller could leave buttons as is, and a stronger painter can customize them like you did. just tonight as assembling the plastics, I was wondering how to do the bases. As a tabletop wargamer since 97, I knew i could never leave them blank. currently considering gluing wooden coffee stir sticks onto the bases, and trimming them down, to make it look like the puppets are on a wooden plank floor. Quote Link to comment Share on other sites More sharing options...
i_was_like_you Posted July 15, 2013 Report Share Posted July 15, 2013 Maybe just some fluffy fabric to represent carpet or rugs. Someone on the forums had a Mr. Graves with carpeting on his base. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.