shahryar Posted February 19, 2016 Report Share Posted February 19, 2016 Okay I know making an actual miniature chair would be pretty basic, two long sticks, two shorter sticks a flat seat and flat back but here is the catch, I am going to have greed of the cross roads seven standing on it as it is tipping over. and I am magnetizing my bases.... so I need to figure out the best way of attaching greed to the chair and the chair to the base without it or her, popping off. Basically back foot will be on the seat front foot will be on the top of the chair's back., I was thinking of making the chair back and seat out of plasticard so the glue bond will be stronger. and was just wondering if anyone had any ideas. Quote Link to comment Share on other sites More sharing options...
prof_bycid Posted February 19, 2016 Report Share Posted February 19, 2016 Piano wire through the whole thing. You can get very thin but very strong and rigid lengths of labelled diameter, and buy a matching drillbit. If the chair had a few round bars in the back, you could pass wire through a hollow one and into the foot. Quote Link to comment Share on other sites More sharing options...
Nexus Posted February 19, 2016 Report Share Posted February 19, 2016 Maybe instead of making the legs out of wood, use brass rods. And make one of the legs just a tiny bit longer and put it through a drilled hole in the base to make it sturdier. Plasticard for the seat and back sound like your best bet there like you said. Quote Link to comment Share on other sites More sharing options...
Munindk Posted February 19, 2016 Report Share Posted February 19, 2016 Warlord games sell 28mm furniture, including chairs: http://store.warlordgames.com/collections/bolt-action-terrain/products/banister-back-a-chair Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.