Rwwin

No Alt Lazarus. 🙁 Only thing I really wanted.

Any chance of getting the building instructions on the website? I picked up some of the building kits during the gencon sale. I can figured out most everything that's shown on the box photos but am scratching my head at all the little bits and bobs that go inside. There's pegs and slots for things, but I can't quite figure out what's supposed to go where. Thanks.

Thanks for the pictures. Would love to see pics of the Wyrdscapes pics if anyone pics any up.

Oh well, still fall for the big push?

I didn't see any tile sets listed with the Gencon announcement. Any update on these?

Thank you for this service! I'd also like to echo the request for errata cards and the ability to buy individual upgrade cards. Last, are the arsenal decks going to remain available at retail or will they be phased out to print on demand only?

Putting it side by side with the concept art, that's a hell of a coincidence!

From the technical angle I'd add a couple of points to Kadeton's point above: 1. Copper and Brass have a higher thermal conductivity than steel which would make it better suited to boilers and steam piping. 2. Copper and Brass are less susseptible to corrosion than mild steel. When I'm painting steam punk models, if it's small, delicate or handles water/steam use brass. If it's big, clunky and dry, use steel.

I made two mods to my watcher plastic model. I replaced the wings and added a clear acrylic rod so that it wasn't balancing on the extended leg. I replaced the wings with Dark Eldar Scourge "batwings": I picked up mine when scourges were "hot" so they were a little cheaper than you'll find now. http://www.ebay.com/itm/WARHAMMER-40K-BIN-BITS-DARK-ELDAR-SCOURGES-2x-BAT-WING-SETS-/361350111059?hash=item5422251f53 It took about a half hour of chopping and green stuffing to make them fit. Fortunaely the scale of the scourge wing matches the "good" wing on the model so it's not to hard to get the new wings to mate up. After getting the watcher built I really didn't trust that one leg to hold it up without breaking so I drilled a hole up through his rear end and added a 1/8" acrylic rod to the base. I thought I had some pictures of it but can't find them. I'll see if I can take some tonight.

As would mine.

I love the Hanged conversion! I wish I'd thought of that.

A fair point, however I'd predict that a consensus of opinion would have the three models (or at least the lass and Trixie) considered to look "right" if they match the Bayou Boss models and not the Kin models. I think Ma could go either way (big or little). On the other hand, many more people cursed a blue streak (myself included) at assembling the Bayou Gremlis vs the Kin models, so looks aren't everything. Meh, I don't mind the joke. It's not like he hasn't seen the same message in at least ten other threads. The proof is in the pudding as they say. If gremlin models continue to get bigger and bigger, people will be less and less interested in them.

Trixie is appropriately disturbing. Now: MAKE SURE THEY ARE THE RIGHT SCALE!

Another bout of threadomancy, but here's another Hans female proxy from Bad Roll Games: http://www.badrollgames.com/tienda/index.php?route=product/product&product_id=69

I definitely like the standing version better.

I have the kit and although I don't like it, I don't believe it's a mistake. It appears to be done on purpose as forced perspective. If you look at it from just the right angle it looks great. From any other angle, it looks a bit goofy. As others have stated above, like it or dislike it, I don't see it being changed/fixed. I'm currently looking for some substitute wings. The plastic dark eldar scourge wings look like a good fit.

Cool! I can't open the file at the bottom of the post though.

Do you mean with a built in eye dropper style (Privateer Press, or Vallejo) or one with a separate eye dropper in the cap? If you mean the former, try FRP Games: http://www.frpgames.com/cart.php?m=product_detail&p=13870&ref=goog&gclid=CLSklZ3iw8MCFcZbfgodWb8Avg#.VM-xWJ3F_Tg

I had a leg up on 3d sculpting (I'm an engineer that already knew how to draft in 2D CAD) when I started. I made the mistake of learning on a program called Blender. It's free and a very powerful program, but it was developed for animators and was very non-intuitive. It's very well documented with many tutorials and videos but I don't recommend it for starting off. When my son started to learn 3D sculpting he used a web tool called Tinkercad It's not very powerful but it is free and is intuitive for a novice learning the basics.

I haven't built mine yet so I'm not taking a stance on whether they "fit" or not with the rest of the Malifaux line, but I found these pictures on a blog that show the leg proportion issue a little better. http://www.whatthefaux.net/2014/11/some-ttb-conversions.html

I picked up the male set and one of my only complaints is that there weren't enough guns on the spure (I was trying to make latigo pistoleros). There are only three pistols in the male set so it might be hard to get more than one gunsmith per box without some extra guns.

Do you mean for sale retail? As she didn't show up for either the Wyrd Gencon sale or the Wyrd Black Friday sale, I would guess that she's not planned to see retail. She does show up on ebay from time to time but be prepared to pay $70 or up. I believe the standard Hannah model is supposed to be out soon though. The TTB Hannah was listed as an exclusive during the kickstarter campaign, so maybe Wyrd will be one of the few that stick to the "exclusive" pledge.

That was my first thought as well, (chunky GW proportions, not necessarily the rat ogre). My second thought was "oh, so many seams to fill". I'm not a Levi player but if I was, I'd consider some of the old confrontation Dirz monsters. They're a little more on the fantasy side than the Frankenstin's monster side, but their cheap and come with a passable paint job. (rebase, wash and a couple of highlights and you're all set). Nemesis Evolution Dasyatis Evolution Aberration Prime

I'm using "Blasted Wasteland" bases from secret weapon miniatures. They've got a sunken center so you can add in water effects. Secret Weapons Blasted Wasteland Link Swamp base video tutorial I've got the bases all lined up. Now if I could only get those $*#&@%# Gremlins painted.

Hello, I'm in Colorado, USA and am looking for a Through The Breach Hannah figure. Everything I have for trade is new. Available LE kits: Black Friday Katanaka Sniper Black Friday Translucent Bette Noire Alt Perdita Santana Ortega (box has some crushing damage) Miss Terious 2 x Miss Ery I also have some standard plastic kits: Of Metal & Flesh Carver Vanessa Claw & Fang No Shelter Here Teddy (standard plastic) Standard Hannah Or good old pay pal.