Ciaran

I will be running one of the intro TTB modules at JordanCon next weekend! It's my favorite convention, my favorite RPG, and I'm in charge of gaming there. What could go wrong?? Malifaux will be at 1pm April 21st. I'll be running a scenario that I call Night of Death. Everyone plays a Guild Guard, and they're being swamped by almost two hundred mindless zombies. Best of luck! TTB will be at 4pm, the same day. Everything will be provided for each game. http://jordancon.org/

Sunday, 8/20/2017, at 1pm at Parker Banner Kent and Wayne in Cornelius NC I'll be running a one shot of Through the Breach. If you're in the area and have been curious about the game this would be a great chance to check it out. This will also serve as an exploratory meeting for setting up a regular game at PBKW, using official Penny Dreadfuls. The address for the store is: 21500 Catawba Ave, Cornelius, NC 28031 There is food in the area, including two grocery stores in easy walking distance. You're welcome to bring snacks or lunch!

I'll be running a one shot adventure (Recruitment Drive) at MACE this year. I'd love to meet some new folks, so please, come on out! For more information: http://ogre.justusproductions.com/ogre/browseschedule/allx http://www.justusproductions.com/mace/mace-information/

I'll be running a few of the intro games at ConCarolinas this year. We'll also be running a couple of Malifaux tournaments and doing demos as often as we can get the people together for them. Con site: http://www.concarolinas.org/ Events Schedule: http://ogre.justusproductions.com/ogre/browseschedule/allx#tab-279 Events listed by game/event name. This is the first of what will hopefully be many conventions that we, the NC Henchmen can do for the community. Come out and say hi, get some games in, or try something new! Through the Breach will take place Friday 6/3 at 8pm, Saturday 6/4 at 1pm and Sunday 6/5 at 11am. I expect each session to last about two hours. Each session will be the Recruitment Drive as I've found this to be a great quick start set of rules as well as a fantastic introduction into both the setting and game.

I'm now down at Abubika games in Gastonia every other Thursday evening. The next time I'll be there is the 28th of April. I'm still at PBKW in Cornelius regularly. If you have an interest in learning the game let me know, and I'll meet you someplace!

This campaign will have it's first game session February 1st 2016 at PBKW in Cornelius. At this time I'm capped out on players (floating between 8 and 10). I'll be using a mix of one shots and the longer Penny Dreadfuls, with the hopes of settling into the published campaign material from Northern Aggression.

The next place and time I'll be able to demos is at Parker Banner Kent and Wayne this coming Saturday, December 5th. I'll be hosting a tournament that day and would love to be able to introduce the game to new folk who'd like to check it out. If anyone would like to arrange a demo day let me know here, and I'll see what we can work out.

Okay, more info: The event will cost $10 a person, all funds go toward prize support, in the form of store credit. There will be a door prize, wooden spoon prize, and a prize for best painted model. https://www.facebook.com/events/1707402862814056/

We'll be playing at Parker Banner Kent and Wayne (the superhero law firm posing as a comic and game shop!) in Cornelius, NC. We'll do registration starting at 10:30am and start the first round at 11am. This will be a 50SS tournament using Gaining Grounds 2015. The rounds will be 2 hours long, with 15 minutes to set up before each game. I'll post some more information and links here in a bit!

Yeah, I love this idea.

I'll be following this, sounds like fun!

This event is cancelled. There will still be a convention of mostly board and card gaming.

The Three Kingdoms is a period in real world China. I can see the name being used in this Alternate Earth. I see no reason why the west may have been settled much earlier in the game version. To each their own though.

Since the original breach was formed in the latter 18th century somewhere "out west" I think we can rule out the wild west most likely. There just were not many legitimate cities at the time. I always thought either New Orleans (for the ease of sea travel for these mages to come from all over the world) or St Louis (as the "doorway" to the west). I lean towards New Orleans to be honest.

I like this idea, wholeheartedly. I agree, if it's done let's be sure it's not stepping on any toes, even if it's not breaking any laws.

Congrats to you as well DeusInnomen! There is a lot of excitement in the local group about M2E. We'll see where it goes, I'm pretty hopeful.

Nagash, I've been in this hobby for a long while, and that is one of the best "tips lists" I've ever read. Thank you!

At Parker Banner Kent and Wayne we'll be running events all day. I'll start Wyrd games events (Malifaux and Evil Baby Orphanage demos) at six pm. My name is Jon, I should be pretty easy to find (I'll be the guy with the Malifaux demo set up). The Meet Up site can be found here. The Facebook page for the store is here. There is a store-miniatures page on Facebook as well, it is here. For anyone that wants to come out for the day there is plenty of food around, a few places are within easy walking distance. There is quite a bit more food (including standard fast food) within a ten minute drive. The store's webpage can be found here. The store's address is: 21500 Catawba Ave, Suite A Cornelius, NC 28031 (it is in the same building as the Rite Aid) The phone number is: (704) 892-GAME (4263) ---------- Post added at 12:49 PM ---------- Previous post was at 12:39 PM ---------- Forgot something else! The Tabletop Day site link for the store is here.

GW sells a GREAT pin vice. I own both the Citadel and the GF9 (the first one I bought) and MUCH prefer the Citadel product.

He found out The Dreamer used the last of the toilet paper. Makes him angry every time.

I have all of the plastic Neverborn stuff. I can't comment on the other models you've mentioned. I definitely want Mr. Tannen and Mr. Graves to have different sized heads. I'll say it again, I LIKE variation in the model sizes.

I prefer the models to actually be differing sizes and proportions. That variance makes for a much more "realistic" line of models.

Do you use a specific certificate? There were a couple floating around, and I can't find any of them :-/ ---------- Post added at 10:50 PM ---------- Previous post was at 10:47 PM ---------- We've always done straight store credit, I'm on the hunt for new ideas. Y'all are rocking them thank you!

The rubber bands are great for holding things together while glue dries. Beyond that, the others are right. Don't use them as part of building material. You might want to look around for bamboo skewers. They might be the right thickness for your upright poles. Plus, they're cheap as can be usually and are great for all sorts of stuff.

I did something similar to Boshea to get mine to fit correctly. I left the vertical part of the tab alone, and cut the horizontal part out of it completely. The issue is that the part that creates the "rounded" edge is acting like a spacer, and not allowing the top pieces to fit correctly. Once I cut those pieces out I was able to get the top halves together to fit as snugly as they did separately, meaning very little seam. I actually tried decreasing the sides of the tab the same way the OP did, and didn't work nearly as well as just cutting off that rounded edge of the tab. I hope that helps someone out there!